#################################################
## SIOS Protection Suite for Linux Patch Notes ##
#################################################

steeleye-lkHOTFIX-core-PL-9219-9.5.1-7154.x86_64.rpm

Patch availability: General Availability
Product (s) Supported: This patch is valid only on LifeKeeper 9.5.1.

NOTE: This patch must be removed before upgrading LifeKeeper to a newer version beyond v9.5.1


Issue(s) addressed by this patch:
PL-9219 - lcdrecover falls into infinite loop when shared storage is disconnected.

Patch description:
This patch provides the following improvement to the LK core recovery processing:

1) This patch prevents lcdrecover from falling infinite loop when shared storage is disconnected, and terminates properly.

Download the patch:
This patch can be found on the SIOS FTP site at the following location:
        http://ftp.us.sios.com/pickup/core-rpm-PL-9219-9.5.1

To download the patch and associated files on Linux perform the following
steps:
1. Run the following commands:
        wget http://ftp.us.sios.com/pickup/core-rpm-PL-9219-9.5.1/steeleye-lkHOTFIX-core-PL-9219-9.5.1-7154.x86_64.rpm
        wget http://ftp.us.sios.com/pickup/core-rpm-PL-9219-9.5.1/steeleye-lkHOTFIX-core-PL-9219-9.5.1-7154.x86_64.rpm.md5sum
2. Verify the download by running the following command:
        md5sum -c steeleye-lkHOTFIX-core-PL-9219-9.5.1-7154.x86_64.rpm.md5sum

NOTE: Alternative download methods can be used but must include all files.  Once the download is complete a verification of the md5sum should be performed.


Installing the rpm:
The patch should be installed on all systems in the cluster. The installation of the patch will automatically create backup copies of all patched files. Before install, lkstop must be executed. After install lkstart must be executed.


To install the patch run the following command:

        rpm -ivh steeleye-lkHOTFIX-core-PL-9219-9.5.1-7154.x86_64.rpm


Uninstalling the rpm:
On removal of the patch all modified files will be returned to their original pre-patched version.

To remove the patch run the following command:

        rpm -e steeleye-lkHOTFIX-core-PL-9219-9.5.1-7154.x86_64