#################################################
## SIOS Protection Suite for Linux HotFix Notes ##
#################################################

steeleye-lkHOTFIX-DR-PL-13245-9.6.0-7333.noarch.rpm

Patch availability: Limited Availability 
Product (s) Supported: This patch is valid only on LifeKeeper 9.6.0.


NOTE[a]: This patch must be removed before upgrading LifeKeeper to a newer version beyond v9.6.0.  An upgrade of the SIOS Protection Suite will require a new version of the patch.


Issue(s) addressed by this patch:
1. PL-13245: Frequency of the Emergency message on unique identifier requirement for the mirrored device.


Patch description:
This patch provides an updated DRBase.pm file that limits the Emergency message to one quickCheck cycle for the resource per LifeKeeper start.  A unique identifier is still required to protect the data from loss or corruption.


Download the patch:
This patch can be found on the SIOS FTP site at the following location:
        http://ftp.us.sios.com/pickup/DR-rpm-PL-13245-9.6.0

To download the patch and associated files on Linux perform the following steps:
1. Run the following commands:
        wget http://ftp.us.sios.com/pickup/DR-rpm-PL-13245-9.6.0/steeleye-lkHOTFIX-DR-PL-13245-9.6.0-7333.noarch.rpm
        wget http://ftp.us.sios.com/pickup/DR-rpm-PL-13245-9.6.0/steeleye-lkHOTFIX-DR-PL-13245-9.6.0-7333.noarch.rpm.md5sum
        wget http://ftp.us.sios.com/pickup/DR-rpm-PL-13245-9.6.0/readme.txt
2. Verify the download by running the following command:
        md5sum -c DR-rpm-PL-13245-9.6.0/steeleye-lkHOTFIX-DR-PL-13245-9.6.0-7333.noarch.rpm.md5sum

NOTE: Alternative download methods can be used but must include all files.  Once the download is complete a verification of the md5sum should be performed.


Installing the rpm:
This patch requires the steeleye-lk-9.6.0-7333.x86_64.rpm and steeleye-lkDR-9.6.0-7333.x86_64.rpm rpms to be installed on the system.  The patch should be installed on all systems in the cluster that have those rpms.  The installation of the patch will automatically create backup copies of all patched files.  


To install the patch run the following command:

        rpm -ivh steeleye-lkHOTFIX-DR-PL-13245-9.6.0-7333.noarch.rpm


Uninstalling the rpm:
On removal of the patch all modified files will be returned to their original pre-patched version.  The removal will not remove any gen app resources using the scripts.

To remove the patch run the following command:

        rpm -e steeleye-lkHOTFIX-DR-PL-13245-9.6.0-7333.noarch