######################################
## LifeKeeper for Linux Patch Notes ##
######################################

steeleye-lkHOTFIX-DR-PL-13245-9.6.1-7412.x86_64.rpm

Patch Availability: General Availability
Product(s) Supported: This patch is valid on LifeKeeper 9.6.1.

NOTE: This patch must be removed before upgrading LifeKeeper beyond LifeKeeper
9.6.1.

Issue(s) addressed by this patch:
PL-13245 - Suppress message for mirrors without a unique identifier.

Description:
This patch provides an updated DRBase.pm file that limits the Emergency message
to one quickCheck cycle for the resource per LifeKeeper start.  A unique
identifier is still required to protect the data from loss or corruption.


Download the patch:
This patch can be found on the SIOS FTP site at the following location:
        http://ftp.us.sios.com/pickup/DR-rpm-PL-13245-9.6.1

To download the patch and associated files on Linux perform the following
steps:

1. Run the following commands:
        wget http://ftp.us.sios.com/pickup/DR-rpm-PL-13245-9.6.1/steeleye-lkHOTFIX-DR-PL-13245-9.6.1-7412.x86_64.rpm
        wget http://ftp.us.sios.com/pickup/DR-rpm-PL-13245-9.6.1/steeleye-lkHOTFIX-DR-PL-13245-9.6.1-7412.x86_64.rpm.md5sum
        wget http://ftp.us.sios.com/pickup/DR-rpm-PL-13245-9.6.1/readme.txt

2. Verify the download by running the following command:
        md5sum -c steeleye-lkHOTFIX-DR-PL-13245-9.6.1-7412.x86_64.rpm.md5sum

NOTE: Alternative download methods can be used but must include all files.
Once the download is complete a verification of the md5sum should be
performed.

Installing the rpm:
This patch requires the steeleye-lk-9.6.1-7412.x86_64.rpm and 
steeleye-lkDR-9.6.1-7412.x86_64.rpm packages to be installed on the system.
The patch should be installed on all systems in the cluster that have these
rpm's.  This patch can be installed on a running system with no impact.  The
installation of the patch will automatically create backup copies of all
patched files.

To install the patch run the following command:

        rpm -ivh steeleye-lkHOTFIX-DR-PL-13245-9.6.1-7412.x86_64.rpm

Uninstalling the rpm:
On removal of the patch all modified files will be returned to their original
pre-patched version.

To remove the patch run the following command:

        rpm -e steeleye-lkHOTFIX-DR-PL-13245-9.6.1-7412.x86_64