######################################
## LifeKeeper for Linux Patch Notes ##
######################################

steeleye-lkHOTFIX-SAP-PL-13460-9.6.1-7412.x86_64.rpm

Patch Availability: General Availability
Product(s) Supported: This patch is valid on LifeKeeper 9.6.1.

NOTE: This patch must be removed before upgrading LifeKeeper beyond version 9.6.1.

Issue(s) addressed by this patch:
PL-13460 - For ERS resources created prior to LifeKeeper 9.4.0, the resource
           properties panel in the LifeKeeper GUI does not show the process
           name ("ENREPSERVER") in the protected instance.

Description:
This patch provides the following improvement to the LifeKeeper Core File
System ARK remove process:

1) This patch fixes an issue where the process name is not displayed in the
   properties panel for an ERS resource created prior to LifeKeeper 9.4.0.


Download the patch:
This patch can be found on the SIOS FTP site at the following location:
        http://ftp.us.sios.com/pickup/SAP-rpm-PL-13460-9.6.1

To download the patch and associated files on Linux perform the following
steps:

1. Run the following commands:
        wget http://ftp.us.sios.com/pickup/SAP-rpm-PL-13460-9.6.1/steeleye-lkHOTFIX-SAP-PL-13460-9.6.1-7412.x86_64.rpm
        wget http://ftp.us.sios.com/pickup/SAP-rpm-PL-13460-9.6.1/steeleye-lkHOTFIX-SAP-PL-13460-9.6.1-7412.x86_64.rpm.md5sum
        wget http://ftp.us.sios.com/pickup/SAP-rpm-PL-13460-9.6.1/readme.txt

2. Verify the download by running the following command:
        md5sum -c steeleye-lkHOTFIX-SAP-PL-13460-9.6.1-7412.x86_64.rpm.md5sum

NOTE: Alternative download methods can be used but must include all files.
Once the download is complete a verification of the md5sum should be
performed.

Installing the rpm:
This patch requires the steeleye-lkSAP package to be installed on the system.  The
patch should be installed on all systems in the cluster that have that rpm.
This patch can be installed on a running system with no impact.  The
installation of the patch will automatically create backup copies of all
patched files.

To install the patch run the following command:

        rpm -ivh steeleye-lkHOTFIX-SAP-PL-13460-9.6.1-7412.x86_64.rpm

Uninstalling the rpm:
On removal of the patch all modified files will be returned to their original
pre-patched version.

To remove the patch run the following command:

        rpm -e steeleye-lkHOTFIX-SAP-PL-13460-9.6.1-7412.x86_64